Repair Kit - Turbokiller Nozzle 70

The Turbokiller 70 nozzle repair kit is a service set intended for regenerating a rotary nozzle (turbo nozzle) used with pressure-washer accessories. It’s used when the subassembly requires replacement of wear parts responsible for sealing and stable, repeatable rotary-jet performance.

MPN / reference: 410972

Kit contents:

• 415322
• 41522
• 41521
• 41534
• 41538

APPLICATION

The kit is used for standard high-pressure accessory servicing:

• regeneration of the Turbokiller 70 turbo nozzle after intensive use,
• replacement of worn internal elements affecting sealing and smooth, stable nozzle operation,
• repair when cleaning effectiveness deteriorates,
• periodic servicing of rotary nozzles used in Therm, Quadro and Profi-related configurations (after confirming compatibility by number).

SYMPTOMS – WHEN REPLACEMENT/SERVICE IS RECOMMENDED

Typical symptoms indicating the turbo nozzle should be serviced:

• reduced cleaning performance despite correct washer parameters,
• uneven rotary-jet effect (an “intermittent” or “cutting out” feeling),
• nozzle subassembly leaks or leaks at connections,
• reduced smoothness/comfort of operation during longer cycles,
• visible wear marks on components after service disassembly.

HOW TO CHOOSE THE RIGHT KIT

Select the repair kit precisely:

• confirm the subassembly designation: Turbokiller 70,
• choose by manufacturer number: MPN 410972,
• compare with disassembled parts and the accessory service documentation.

With rotary nozzles, design differences between variants matter-MPN is the primary identifier.

COMPATIBILITY

The kit is intended for the Turbokiller 70 subassembly. Compatibility with a specific turbo nozzle must be confirmed by MPN 410972 and the parts list for the accessory. Therm, Quadro and Profi are application areas that still require verification by number and the manufacturer’s documentation.

[faq]

Is kit 410972 only for “Turbokiller 70”, or can it fit other sizes too?|This kit is dedicated to the Turbokiller 70 variant. In practice, do not assume interchangeability between sizes-identification by MPN 410972 is the safest approach.

What should I inspect during regeneration to make the repair last?|Besides replacing the kit parts, check the condition of seats, mating surfaces and accessory connections. Worn or contaminated contact surfaces can cause leaks to return even with new parts.

Should the turbo nozzle run “quieter” or with less vibration after service?|Often yes-if the subassembly was worn, correct reassembly can restore more stable operation. The key criteria, however, are no leaks and a consistent jet effect.

Can I service it if I’m not sure the turbo nozzle is the problem?|It’s best to rule out simple causes first: water filter, water supply, hose/gun condition, and a quick test with another accessory. If symptoms “follow” the turbo nozzle, servicing with the kit makes the most sense.

What most commonly accelerates wear in rotary nozzles?|Most often: contamination in the water (lack of filtration), operating with dirty connections/mating surfaces, and prolonged heavy use without periodic accessory servicing.

[/faq]