- New
The 492011 O-ring is a seal measuring 75.92 x 1.78 mm from the pump gearbox group of Kränzle K 1050 TS and K 1050 P pressure washers. Original Kränzle number: 492011 (49.201 1 in the catalog, item 3, 1 piece per machine).
The O-ring is in the gearbox section, right behind the housing plate (49200) and the 12 x 20 x 5 mm oil seals (43081). The same group contains the 12 mm pistons with rings (49209, 49230), the piston springs (49203), the swash plate (49202), the thrust bearing (49208) and the oil filler plug (43437 2). Wear shows on the O-ring itself: the rubber hardens, flattens and cracks, and then an oil leak appears at the joint.
Fits Kränzle K 1050 TS and K 1050 P pressure washers. 1 piece per machine.
Can the O-ring from the K 1152 gearbox (83 x 2) replace 492011?|No. The K 1152 gearbox has an 83 x 2 mm O-ring (43039), and the K 1050 a 75.92 x 1.78 mm O-ring. These are different diameters and thicknesses, so they are not interchangeable.
Can an ordinary 75.92 x 1.78 O-ring from a shop replace the original?|Usually yes as far as size goes, but beyond that the material and rubber hardness in contact with gearbox oil matter. The safest choice is the original or an oil-resistant O-ring.
How much oil needs topping up after the housing plate is removed?|The K 1050 parts list gives 0.1 l of oil: Kränzle gear oil (40.092 2) or W 15/40 oil. When changing the oil, the machine is tipped head down and the oil collected in a container.
What is replaced together with the O-ring when the gearbox is open?|The 12 x 20 x 5 mm oil seals (43081, 3 pieces) at the pistons and the 13 x 2.6 mm O-ring (15017). Taking the plate off is a chance to assess these seals, as they have separate numbers.
There is water in the oil or the oil is milky. Is the 492011 O-ring to blame?|Rarely. Water in the oil usually enters through the piston seals or the oil seals (43081). The 492011 O-ring seals the housing joint, so it shows up as oil leaking to the outside.
[/faq]
Model
1050 TS
Model
1050 TST
Model
1050 P
Model
Quickly