Exhaust outlet adapter fi 200 Therm

Exhaust outlet adapter 44192 allows the rectangular exhaust outlet in Kranzle Therm washers to be connected to a round fi 200 mm connection. It is a transition element used when the machine is to be connected directly to a chimney or exhaust duct.

APPLICATION

The adapter is installed on the exhaust outlet of Kranzle Therm machines. Its function is to change the connection geometry from a rectangular 13 × 6 cm outlet to a round spigot with a diameter of 200 mm.

In service practice, this element is used when installing the washer in a location where exhaust gases are to be discharged into a chimney or prepared extraction system. Correct seating of the adapter on the outlet, stable connection with the downstream duct, and absence of gaps at the transition between the rectangular and round section are important.

SYMPTOMS – WHEN REPLACEMENT IS RECOMMENDED

Replacing the exhaust outlet adapter may be necessary when the following issues occur:

• leakage at the connection with the exhaust outlet,
• visible damage to the contact edge,
• deformation preventing even seating of the adapter,
• lack of stable connection with the fi 200 mm duct,
• corrosion, material loss, or mechanical damage at the contact point,
• the adapter does not match the required chimney connection diameter.

For this part, connection tightness and geometry are the key factors. Superficial signs of use are not an issue if the adapter sits securely on the outlet and allows the exhaust duct to be connected correctly.

HOW TO SELECT THE CORRECT PART

The adapter should be selected based on reference number 44192, the Kranzle Therm series, and the connection dimensions. This version provides a transition from a rectangular 13 × 6 cm outlet to a round fi 200 mm connection.

Before installation, compare the adapter with the previous element or with the exhaust outlet in the machine. The key points to check are the base shape, rectangular inlet size, round outlet diameter, and routing of the downstream chimney duct.

COMPATIBILITY

Exhaust outlet adapter 44192 fits Kranzle Therm pressure washers. It is used for direct connection of the machine to a chimney through a transition from a rectangular 13 × 6 cm outlet to a round fi 200 mm connection.

[faq]

Does adapter 44192 change the connection diameter to fi 200 mm?|Yes. The adapter creates a round fi 200 mm outlet, allowing the exhaust outlet to be connected to a chimney duct or exhaust gas extraction system of this diameter.

What does the 13 × 6 cm dimension mean for this adapter?|It refers to the rectangular side of the adapter that matches the exhaust outlet in the machine. The other side of the adapter has a round connection with a diameter of 200 mm.

What should be checked when installing the adapter to a chimney?|The adapter should sit evenly on the exhaust outlet, and the downstream duct should be securely seated on the round connection. Check that the connection is not misaligned and that no gaps form between the components.

Does a damaged adapter edge matter?|Yes, if it affects contact with the outlet or causes leakage at the connection. In exhaust gas discharge components, the edges and contact surfaces are more important than external appearance alone.

Is the adapter part of the burner or control system?|No. It is part of the exhaust outlet connection. It does not regulate burner operation, control temperature, or replace heating system components.

[/faq]