Sealing Sleeve 14mm

The soft 14 mm 14x24x5 seal is a sealing element used in pressure washer pump assemblies, where proper fit in the gland and stable performance under pressure are critical. In service practice, it is used during pump repairs and overhauls when a worn seal causes leaks or a drop in operating performance.

MPN / reference: 41613
Size: 14x24x5
Type: soft seal

APPLICATION

The seal is used in typical service work:

• sealing the hydraulic section of the pump,
• repairing leaks in sealing seats,
• rebuilding pumps during inspection or overhaul,
• replacing worn sealing elements in systems operating under high pressure.

SYMPTOMS - WHEN REPLACEMENT IS RECOMMENDED

It is worth replacing the seal when the following appear:

• water leaks around the pump or sealing housing,
• drop in working pressure despite proper accessories,
• deformation, flattening, or damage to the sealing edge after disassembly,
• recurring leakage after previous service,
• signs of wear indicating improper cooperation with the gland or guiding element.

HOW TO CHOOSE THE RIGHT PART

Selection of the seal should be precise:

• verify the 14x24x5 size,
• confirm the manufacturer number: MPN 41613,
• compare with the removed part: profile, height, and seating method in the gland.

In high-pressure systems, even a small dimensional difference can result in leakage or faster seal wear.

COMPATIBILITY

The seal should be selected based on MPN 41613 and the 14x24x5 size, according to the parts list for the specific pump or assembly. Selection should not be based solely on the general description “14 mm seal” without confirming compatibility in the service documentation.

[faq]

Is the soft 14x24x5 seal suitable for every pump with 14 mm sealing?|That should not be assumed. Besides the diameter itself, the full size, seal profile, and compatibility with the gland also matter. The safest way is to confirm by MPN 41613.

What does it mean in service practice that the seal is “soft”?|It describes the seal type and the way it works in the gland. In practice, it means correct seating and proper cooperation with guiding elements and the working surface are very important.

Can a new seal be damaged already during installation?|Yes. The most common mistakes are misalignment, twisting of the seal, installation into a dirty gland, or fitting it against a damaged cooperating surface. That is why installation should be done carefully and axially.

What symptoms suggest that the problem may be not only the seal, but also the gland or piston?|If a new seal starts leaking again very quickly and the leak returns after a short time, it is worth checking the condition of the gland, piston surface, and other cooperating elements.

When replacing one seal, is it worth checking the whole seal set?|Yes. In service practice, the entire sealing set is often assessed, because wear of one element may mean the others are also close to the end of their service life.

[/faq]