Lance tube 342 mm 1/4"

Lance tube 123853 with a length of 342 mm and 1/4" thread forms the working section of the accessory between the gun, handle, or additional spray component. For this part, the most important aspects are straight tube geometry, undamaged thread, and leak-free connection with the remaining accessories.

APPLICATION

The tube is used in Kranzle pressure washer accessories as part of a working lance. Its role is to transfer the water flow from the handle toward the nozzle, extension, or another component mounted at the end of the system.

In service practice, replacing the tube makes sense when the lance section itself or its connection has been damaged. The 342 mm length maintains a specific working reach, and the 1/4" thread must match the components to which the tube will be connected.

SYMPTOMS – WHEN REPLACEMENT IS RECOMMENDED

Replacing the lance tube may be necessary when the following issues occur:

• damaged, seized, or worn 1/4" thread,
• leakage at the connection with accessories,
• bent tube after impact or overload,
• inability to tighten the cooperating component correctly,
• damage to the connection end,
• signs of corrosion or mechanical damage at the connection point.

Superficial scratches on the tube do not necessarily require replacement. What matters are defects affecting tightness, straightness, thread condition, or stable tightening with the accessories.

HOW TO SELECT THE CORRECT PART

The tube should be selected based on the 342 mm length, 1/4" thread, and reference number 123853. Before installation, compare the new component with the removed tube: total length, thread type, end shape, and connection method with the remaining lance parts.

The 1/4" thread alone is not always enough for reliable selection. Tube length and end design are also important, because they determine whether the component will fit the existing accessory setup without changing nozzle or handle position.

COMPATIBILITY

Lance tube 123853 has a length of 342 mm and a 1/4" thread. It is used as part of Kranzle pressure washer accessories in configurations requiring a tube with these specifications.

[faq]

Is tube 123853 a complete lance?|No. It is a lance tube, meaning a working accessory component. A complete setup may also require a gun, handle, nozzle, extension, or other connection elements.

What should be checked when the tube leaks at the connection?|First inspect the 1/4" thread, seal condition, and the socket of the component to which the tube is tightened. Leakage may result from a damaged thread, contamination at the connection, or a worn seal.

Can the tube be selected only by the 342 mm length?|No. The length must be considered together with the 1/4" thread, end design, and reference number 123853. Tubes with similar length may differ in the way they connect to accessories.

What can make installation difficult despite the correct thread?|The issue may be caused by contaminated threads, damaged first thread turns, a seized old seal, or a cooperating component with a different end type. Before tightening, clean the connection and compare the ends with the old tube.

[/faq]