Lance support

A lance left without stable support can easily move across the housing, rest against unintended parts, or load the holders in the wrong place. Lance support 42604 provides a designated resting point in the front section of the Kranzle pressure washer and helps keep the accessory in an orderly position next to the machine.

APPLICATION

The element is located in the front section of the washer housing, in the area intended for placing the lance. It is a housing component with practical importance during everyday use in a workshop, service environment, or industrial applications.

The support is not involved in the hydraulic operation of the washer, but it affects how the accessory is stored on the machine. Its geometry must match the front housing, because a loose or incorrectly seated support may cause unstable lance positioning, rubbing against the housing, or stress at mounting points.

SYMPTOMS – WHEN REPLACEMENT IS RECOMMENDED

Replacing the lance support may be necessary when the following issues occur:

• cracks at the seating point or along the support edges,
• broken sections responsible for keeping the lance in the correct position,
• looseness of the element in the front housing,
• misalignment of the support after impact or overload,
• traces of the lance rubbing against the housing due to incorrect support.

A damaged support usually does not stop the washer from operating, but it worsens handling ergonomics and may increase wear of adjacent housing parts.

HOW TO SELECT THE CORRECT PART

When selecting the part, compare the shape of the support with the removed component, especially at the seating points, contact edges, and in the area where the lance rests. The position of the element in the front housing and compatibility with the housing version are also important.

Reference number 42604 helps confirm the correct part variant, especially when similar housing elements differ in mounting details or colour. The name “lance support” alone is not enough for reliable selection, because accessory holders and supports may have different geometry depending on the washer series.

COMPATIBILITY

Support 42604 is a grey front housing element with lance supports for Kranzle pressure washers. Compatibility should be confirmed by reference number, part shape, seating method, and fitment to the front housing.

This part should not be selected solely by colour or similar appearance. In housing components, the key details are the position of the clips, edge profile, seating depth, and lance support point.

[faq]

Why may the support fail to hold the lance securely despite correct installation?|The cause may be wear or damage to an adjacent housing component, misalignment of the front panel, or deformation of the area where the support rests. It is worth checking the entire mounting area, not only the support itself.

Is the colour of the element enough to identify the correct version?|No. The grey colour helps initially identify the visual variant, but compatibility depends on geometry, seating points, and reference number 42604.

What may indicate that the wrong support variant has been selected?|Typical signs include the element not closing properly into the housing, unnatural looseness, a protruding edge, difficulty positioning the lance, or the need to press the part during installation.

Can a damaged support affect other housing elements?|Yes, especially when the lance starts resting in a place not intended for it. This may cause rubbing, local loading of the housing, or stress in adjacent holders.

When does damage to the support qualify it for replacement?|When the support is cracked, broken, unstable in the housing, or no longer provides correct support for the lance. With superficial signs of use, replacement is usually not necessary.

What should be checked before installing a new support?|Clean the seating area, inspect the condition of the clips, and compare the edge profile with the removed part. If the front housing is cracked or deformed, the new support may not sit correctly.

[/faq]