- New
Duża dostępność
The 491250 thermal cut-out is a single-pole 14 A overload release in the electrical box of Kränzle pressure washers. Original Kränzle number: 491250 (49.125 0 in the older notation, 1 piece per machine). It fits K 1050 (TS, TST, P) and X 8/150 TST and X A15 TST pressure washers.
The thermal cut-out is fitted in the electrical box and protects the motor circuit against overload: when the current is exceeded, it cuts the power. In the K 1050 parts lists it is item 29 next to the release cable (49.126, item 28), the capacitor, the switch (49.112) and the lower part of the box (49.104). On the X machines it is item 28 next to the 50 µF capacitor (496256), the lower part of the box (496012) and the switch (491121). Wear is usually damage to the contacts or the mechanism, so the cut-out trips too early or stops conducting.
Fits Kränzle K 1050 TS, K 1050 TST, K 1050 P, X 8/150 TST and X A15 TST pressure washers. 1 piece per machine.
Can the 14 A cut-out from the X 8/150 be replaced with the 16 A one (491251)?|No. The release current is matched to the model: 14 A (491250) on the X 8/150 TST and X A15 TST, 16 A (491251) on the X 10/140 TST and X A17 TST. A higher release current reduces the effectiveness of the motor protection, so selection is by model.
The cut-out trips the machine often. Replace it or look for the cause?|Look for the cause first: the capacitor (35 µF on the K 1050, 50 µF on the X), the motor bearings, the mains voltage and the length and cross-section of the extension cord. A new cut-out won't remove the overload that trips the old one.
What else is checked besides the cut-out when replacing it in the box?|The release cable (49.126 on the K 1050), the terminals, the capacitor and the box cover seal. Before working in the box, the machine is disconnected from the mains.
[/faq]
Model
1050 TS
Model
1050 TST
Model
X8/150 TST
Model
X A15 TST
Model
1050 P
Model
Quickly