- New
Duża dostępność
The 490411 unloader valve is a start-up relief valve from the bypass valve and pressure switch group of Kränzle pressure washers. Original Kränzle number: 490411 (49.041 1 in older lists, item 11, 1 piece per machine). It fits K 1050 TS and K 1050 P, K 1152 TS and TST, HD 7/122 and HD 10/122 (also TS) and X 8/150 TST, X 10/140 TST, X A15 TST and X A17 TST.
In the set:
The valve is fitted in the bypass valve housing. In the parts lists it stands in one assembly with the stainless steel seat (14118), the retaining ring (13147), the stainless steel spring (49042), the closing screw (49043) and the 12 x 2 mm (2 pieces) and 11 x 1.5 mm O-rings. It works every time the machine is switched on, so wear usually affects the valve itself, its seat and the O-rings.
Fits Kränzle K 1050 TS, K 1050 P, K 1152 TS, K 1152 TST, HD 7/122, HD 7/122 TS, HD 10/122, HD 10/122 TS, X 8/150 TST, X 10/140 TST, X A15 TST and X A17 TST pressure washers. 1 piece per machine.
Is valve 490411 the same as the whole bypass valve with the pressure switch?|No. It is one item (11) in an assembly that also contains the seat, spring, closing screw, control piston, knob and pressure switch parts. The whole assembly and its parts have separate numbers.
How does 490411 differ from the valve repair kit 49055?|In the K 1050, K 1152 and X series lists the valve repair kit has number 49055 and is a separate item from 490411. When only the valve itself is worn, replacing this one part is enough. When the seals and seat are also worn, they are replaced together with it.
Is the same valve in the K 1050 and the HD 10/122, even though the pumps are different?|Yes, number 490411 is common. The control piston differs: the K 1050 has 49243 1, and the K 1152, HD and X series 44532. The valve is chosen by number, and the piston by machine model.
Which parts are replaced together with the valve so the leak doesn't return?|The 12 x 2 mm O-rings (150051, 2 pieces) and 11 x 1.5 mm (12256). The seat (14118) and retaining ring (13147) should also be assessed. A scratched seat won't seal a new valve.
After replacing the valve the machine still starts badly. What should I check?|The valve spring (49042) and closing screw (49043) from the same group, then the control piston with its seals. If that doesn't help, the cause lies outside the valve: in the motor, capacitor or switch.
[/faq]
Model
1152 TS
Model
1154 TST
Model
X A17 TST
Model
1152 TST
Model
1050 TS
Model
1050 TST
Model
X10/140 TST
Model
X8/150 TST
Model
X A15 TST
Model
1050 P
Model
HD 10/122 TS
Model
HD 7/122 TS