Lance tube 600 mm 1/4"

Lance tube 123852 with a length of 600 mm and 1/4" thread forms an extended working section of the pressure washer accessory setup. It is used where a greater lance reach is needed while maintaining a rigid threaded connection with the remaining components of the system.

APPLICATION

The tube is used as part of a working lance in Kranzle pressure washer accessories. It connects the handle, gun, or additional connection element with the working tip, nozzle, or other accessory matched to the 1/4" thread.

The 600 mm length is important when working at a greater distance from the cleaned surface. Compared with shorter tubes, it moves the spray point further away from the operator, so during replacement it is worth keeping the same length if the working setup was previously comfortable and correctly selected.

SYMPTOMS – WHEN REPLACEMENT IS RECOMMENDED

Replacing the lance tube may be necessary when the following issues occur:

• damaged, seized, or worn 1/4" thread,
• leakage at the connection with accessories,
• bent tube after impact or overload,
• inability to tighten the cooperating component securely,
• damaged connection end,
• visible corrosion or damage in the thread area.

Minor scratches on the tube surface usually have no service significance. What matters are defects affecting tightness, straightness, thread condition, or stable connection with the remaining accessories.

HOW TO SELECT THE CORRECT PART

The tube should be selected based on the 600 mm length, 1/4" thread, and reference number 123852. Before installation, compare the new component with the removed tube: total length, thread type, end shape, and connection method with the gun, handle, or additional accessories.

The 1/4" thread alone is not enough for reliable selection. Tubes may differ in length, end design, and seating method, so in practice all parameters must be checked, not only the connection diameter.

COMPATIBILITY

Lance tube 123852 has a length of 600 mm and a 1/4" thread. It is used as part of Kranzle pressure washer accessories in configurations requiring a longer working tube with this connection.

[faq]

Does the 600 mm tube change operation compared with the shorter version?|Yes. The longer tube increases the distance between the gun and the working tip, which may be useful when cleaning larger surfaces or areas where the operator needs more distance from the water jet.

What should be checked if the 1/4" threaded connection leaks water?|First inspect the thread condition, seal, and socket of the cooperating component. Leakage often results from a damaged seal, contamination at the connection, or a worn socket, not necessarily from the tube itself.

Does a slightly bent steel tube always require replacement?|Not always. If the tube can still be mounted leak-free and does not interfere with accessory handling, replacement may not be necessary. The problem appears when the bend makes work difficult or loads the connections.

Why is the 1/4" thread information alone not enough?|Because in addition to the thread, the 600 mm length, end design, and connection method with the remaining accessories are also important. A tube with the same thread may have a different length or working end.

What can make installing the new tube difficult despite the correct dimension?|Most often, contaminated threads, damaged first thread turns, or a cooperating component worn from previous use. Before tightening, clean the connection and compare the ends with the old tube.

[/faq]