Repair Kit - Turbokiller Nozzle 50

The Turbokiller 50 nozzle repair kit is a service set intended for regenerating the rotary nozzle (turbo nozzle) used with pressure-washer accessories. In practice, it’s used when the subassembly needs replacement of wear parts responsible for sealing and repeatable rotary-jet performance.

MPN / reference: 410966

Kit includes:

• 41534
• 41522
• 41534
• 41538
• 41521

APPLICATION

The kit is used for typical high-pressure accessory servicing:

• regeneration of the Turbokiller 50 turbo nozzle after intensive use,
• replacement of worn internal elements affecting sealing and stable nozzle operation,
• repair when cleaning effectiveness drops,
• periodic inspections of rotary nozzles used in Therm-RP systems and in Quadro/Profi/Primus configurations (after compatibility confirmation).

SYMPTOMS - WHEN REGENERATION/REPLACEMENT IS RECOMMENDED

Most common signs indicating the nozzle should be regenerated:

• noticeable drop in cleaning performance despite correct machine parameters,
• unstable rotary jet and uneven working result,
• nozzle subassembly leaks or leaks at connections,
• reduced smoothness/comfort of operation during longer cycles,
• visible wear of components after service disassembly.

HOW TO CHOOSE THE RIGHT KIT

Select the repair kit precisely:

• confirm the subassembly designation: Turbokiller 50,
• choose by manufacturer number: MPN 410966,
• compare with disassembled parts and the accessory service documentation.

Repair kits for different rotary-nozzle versions are not interchangeable-MPN is the primary identifier.

COMPATIBILITY

The kit is intended for servicing the Turbokiller 50 subassembly. Compatibility with specific accessories must be confirmed by MPN 410966 and the parts list. Therm-RP, Quadro, Profi and Primus are application areas that still require verification by number and the manufacturer’s documentation.

[faq]

Does “Turbokiller 50” indicate a specific nozzle size/flow rate, or only a series name?|It’s a designation of a specific subassembly variant. In practice, the safest identification of the repair kit is by MPN 410966, because names/labels may appear in different accessory configurations.

How can I tell turbo-nozzle wear from a problem on the washer side (pump/valves)?|If the issue disappears when you switch to a known-good accessory (e.g., another nozzle/lance), the turbo nozzle is often the source. If symptoms are identical across different accessories, the washer system is more likely at fault (water supply, valves, filtration, pump). A service kit makes sense when diagnostics point to the accessory.

Do I need to calibrate or adjust anything after regeneration?|Usually there’s no “calibration” in the adjustment sense-correct assembly and a leak check are key. After reassembly, run a working test and verify jet stability and absence of leaks.

Can I mix parts from different kits (e.g., Turbokiller 45 and 50)?|Not recommended. Even if parts look similar, dimensional differences and fit inside the subassembly can cause leaks or unstable operation. Stick to MPN 410966 for Turbokiller 50.

What most commonly shortens turbo-nozzle life if the washer itself is fine?|Most often: operating on contaminated water (no filtration), solid particles in the water path, prolonged use in harsh conditions, and neglected cleaning/maintenance of the accessory after use.

[/faq]