Lavor Fit 35 B Li

The Lavor FIT 35B Li (code 37024-00001, also offered as FIT 35 Li) is a compact floor scrubber dryer where the operator walks behind the machine. It scrubs and picks up dirty water in a single pass, and is powered by a 25.2 V / 6.4 Ah lithium-ion battery. The battery and charger are included in the set. Suited to small and medium areas: offices, shops, gyms, workshop back rooms.

Technical data

• Lavor code: 37024-00001 (0.071.0001 in the data sheet)
• Power: Li-ion battery 25.2 V / 6400 mAh, replaceable
• Scrubbing width: 350 mm; squeegee width: 422 mm
• Maximum output: 1500 m²/h
• Clean water (solution) tank: 1.9 l; dirty water tank: 1.5 l, both removable
• Brush: cylindrical PP, 350 rpm, 32 W brush motor
• Suction: 70 W motor, 500 mmH₂O vacuum
• Noise level: below 70 dB(A)
• Weight 11.3 kg, dimensions 44.7 x 42.2 x 115.9 cm
• Foldable, with adjustable handle height and LED lighting at the front

In the set

• Cylindrical PP brush (00080-04154)
• Front and rear squeegee blades (00005-02201 and 00005-02202)
• Li-ion battery (00055-00082)
• EU charger (00056-00081)

Application

The scrubber dryer speeds up washing of smooth floors: there is no need to mop and collect the water separately. The narrow 350 mm brush and low weight make work between shelves, in corridors and in small halls easier. The clean water tank holds only 1.9 l, so on larger areas it has to be refilled more often. It's worth sweeping the floor before washing, because the machine picks up water, not debris.

What to look out for when choosing

• Version with battery. Code 37024-00001 covers the machine with battery and charger. The battery can also be bought separately as a spare part (00055-00082).
• Output of 1500 m²/h. This is the maximum value from the technical data, not the real area washed on one tank fill.

[faq]

Why is the scrubbing width 350 mm and the squeegee 422 mm?|The cylindrical brush is 350 mm and it sets the washing width. The squeegee blade is wider (422 mm) so that it also collects water from the edges of the scrubbing strip.

Does the machine pick up crumbs, sand and fine debris?|Treat it as a machine for water, not for debris. One source rules out picking up crumbs and rubble, while another lists a dirt-suction function for this model, so don't rely on it for solid contamination. Sweep the floor before washing, because sand between the blade and the floor leaves streaks and scratches the surface.

Which wear parts have separate numbers?|Cylindrical PP brush: 00080-04154. Squeegee blades: 00005-02201 (front) and 00005-02202 (rear). Battery: 00055-00082. EU charger: 00056-00081. In the data sheet the same parts have older numbers with the 0.971 prefix (e.g. brush 0.971.0030), so when ordering give the number from the new code system.

After replacing the blades the floor is still left wet. What should I check?|Whether both blades (front and rear) are fitted correctly, whether the suction channel is blocked and whether the dirty water tank (1.5 l) is full. With a full tank the machine stops collecting water effectively.

Does the machine have a drive?|The operator pushes the machine, so on a large area its low weight (11.3 kg) matters too.

[/faq]