0
Cart
€0.00
Search parts
Lavor Thermic 10.1 HW 1621
36111-00032
680 x 950 x 950 cm
124 kg
Authorised distributor
€8,242.33
Matching model Thermic 10.1 HW 1621
The Lavor Thermic 10.1 HW 1621 (code 36111-00032) is a stand-alone heated-water pressure washer powered by a Yanmar L100V engine (diesel, 10 HP). It works without a mains supply, as it has an electric start with a battery included in the set. Compared with version 36111-00031 it has lower pressure (160 bar) but a higher water flow (1260 l/h), at an outlet water temperature of up to 140°C.
Technical data
- Lavor code: 36111-00032
- Engine: Yanmar L100V, diesel, air-cooled, 10 HP, electric start with battery
- Working pressure: 160 bar
- Flow: 1260 l/h (21 l/min)
- Water temperature: max. 60°C at the inlet, max. 140°C at the outlet
- Pump: Lavor CL6.0, 3 ceramic pistons, brass head, 1560 rpm
- Boiler: stainless steel, double coil, diesel tank, flame control system
- Steel frame; weight 200 kg, dimensions 120 x 73 x 95 cm
In the set
- AL55 gun (350 bar, 45 l/min, 160°C), 3/8" swivel connection
- 700 mm M22 lance (high pressure)
- 10 m high-pressure hose
- Starter battery
Application
The machine suits washing where there is no power outlet and grease, oil or dried-on dirt must be removed: agricultural and construction machinery, building sites, workshops, technical facilities. The higher flow at 160 bar makes it easier to rinse large surfaces, and hot water shortens washing of greasy dirt compared with cold water. Petrol/diesel operation requires ventilation, so the machine is placed outdoors or in a room with exhaust extraction.
What to look out for when choosing
- 160 bar and 1260 l/h, not 200 bar. Version 36111-00031 has 200 bar and 960 l/h, and the remaining data (engine, pump, temperatures, weight, dimensions) are the same. Match the version to the type of dirt: higher pressure for tough dirt, higher flow for fast rinsing.
- Water supply. A flow of 1260 l/h is 21 l/min, so the water supply must cover it. A hose that is too narrow or weak mains pressure will lower the flow at the outlet.
- Hot water. The cold-water version with a diesel engine is a separate model, the Thermic 10.1 D (36022-00029 and 36022-00030), without a boiler.
- Missing data. We don't state the fuel tank capacity, burner output or fuel consumption, as we don't have them confirmed for this code.
[faq]
What does "1621" in the name mean?|It is a version designation matching its parameters: 160 bar and 21 l/min, i.e. 1260 l/h. Version 36111-00031 has 200 bar and 960 l/h.
When to choose 36111-00032 and when 36111-00031?|00032 gives more water at lower pressure, so it works better for rinsing large surfaces and removing greasy dirt. 00031 has higher pressure at a lower flow, which helps with dried-on, stuck-on dirt.
How should I prepare the water supply for a flow of 21 l/min?|Use a supply hose of a suitable diameter and check that the mains or tank gives sufficient flow. The inlet water temperature must not exceed 60°C.
The burner doesn't ignite even though water is flowing. Where should I look for the cause?|The burner in this machine is controlled by water flow and has a flame control set. Start by checking that water is actually flowing through the boiler (supply, inlet filter), and only then move on to the flow sensor and the flame control system.
[/faq]
Technical data
Model
Thermic 10.1 HW 1621
Engine
Diesel Engine
Working Pressure(bar)
160
Maximum Pressure (bar)
180
Water Flow Rate (l/min)
21
Pressure Hose (m)
10
Motor Speed (RPM)
3400
Hose Reel
NO
Connector
M22
Detergent Suction
YES
Water Filter
Built-In
Type of Water Heating
Gas-fired
Polecane produkty
