Oil drain hose

Oil drain hose 441281 works at the pump drive and is used to discharge oil during service operations. The 335 mm length is important for correct hose routing inside the machine housing and for convenient oil draining without spilling it over adjacent components.

APPLICATION

The hose is used in the oil service system of the Kranzle pressure washer pump. Its task is to direct used oil from the drain point into a service container during oil replacement or oil condition inspection.

In service practice, this element is mainly important during periodic pump maintenance. The hose should be clear, securely seated, and routed so that it is not kinked or accidentally compressed inside the housing. The 335 mm length allows the intended hose position to be maintained within the pump drive area.

SYMPTOMS – WHEN REPLACEMENT IS RECOMMENDED

Replacing the oil drain hose may be necessary when the following issues occur:

• leakage during oil draining,
• hardening or loss of hose flexibility,
• cracks at the ends or at a bend point,
• blockage restricting free oil flow,
• signs of leakage at the connection,
• hose kink preventing proper drainage.

Surface oil contamination does not automatically mean damage. What matters are leakage, lack of flow, damaged ends, or hose condition that makes controlled oil service difficult without spilling.

HOW TO SELECT THE CORRECT PART

The hose should be selected based on the 335 mm length and reference number 441281. During replacement, compare the new component with the removed hose: length, diameter, seating method on the connection, and routing inside the pump housing.

The hose should be neither too short nor excessively long. A hose that is too short may make oil draining inconvenient, while one that is too long may sit incorrectly inside the housing. It is also important that the end holds securely on the drain point and does not slip off during service.

COMPATIBILITY

Oil drain hose 441281 has a length of 335 mm and is used at the pump drive in Kranzle pressure washers. During replacement, it should be selected by reference number, length, and connection method to the oil drain point.

[faq]

When is the issue caused by the hose, and when by the drain point?|If the hose is cracked, leaking, hardened, or blocked, the issue concerns the hose. If the hose is clear but oil still does not drain correctly, the drain point and connection condition should be checked.

Can the old hose be left in place after an oil change?|Yes, if it remains flexible, leak-free, and holds securely on the connection. Replacement makes sense when the hose is damaged, hard, leaking, or makes controlled oil draining difficult.

[/faq]