Repair Kit - Kränzle Pump Seals

Kränzle 15 mm pump seal repair kit is a service set designed to restore tightness and stable operation of a high-pressure pump. Used during pump refurbishment in X / XA series units when worn seals affect working pressure and cause leaks in the pump section.

MPN / reference: 496036
Weight: 0.060 kg
Dimensions / size (packaging): 10×1×10

APPLICATION

The kit is used in typical Kränzle pump service work, especially for:

• replacing seals in the piston section / pump head area,
• eliminating water leaks around the pump,
• pump refurbishment after intensive use or after downtime,
• periodic inspections of the high-pressure system in industrial pressure washers.

SYMPTOMS - WHEN IT’S WORTH REPLACING

Symptoms indicating pump seal wear:

• water leaks visible around the pump or under the unit,
• drop in working pressure despite functional working accessories,
• jet pulsation and unstable pressure holding,
• difficulty maintaining constant pressure under load,
• moisture/leak marks appearing after downtime.

HOW TO CHOOSE THE RIGHT PART

Precise selection is key for pump tightness and service life:

by manufacturer MPN / reference: 496036,

by size (15 mm): according to pump requirements and kit specification,

by comparing with removed parts: compare seal profile and dimensions before installation.

In service practice, it’s best to rely on the reference number and the documentation/parts list.

COMPATIBILITY

This kit is described as intended for Kränzle 15 mm pumps used in X / XA series units.
For safe selection, confirm compatibility by MPN 496036 and the pump’s technical data (table/specification). Selecting only based on the series name without reference verification is not recommended.

[faq]

How do I confirm that kit 496036 fits my pump?|Verify MPN 496036 in the documentation or parts list and confirm your pump uses 15 mm seals. Additionally, compare the parts with the seals removed during disassembly.
Does 15 mm mean the kit will fit every Kränzle pump?|No. Size matters, but fit also depends on pump design and the exact seal set. The basis for selection should be the MPN and technical data, not the dimension alone.
Can I use an aftermarket seal set instead of the original kit?|Only if the alternative has identical dimensions, profile, and intended use for high-pressure systems. Incorrect selection usually results in leaks and faster wear, so the MPN and specification should be your reference point.

[/faq]