Sludge Remover with Hose – 3800 mm, Nozzle 55

The 3.8-meter suction hose allows convenient access to the bottom and hard-to-reach areas without the need to enter the tank. This solution significantly facilitates cleaning work in ponds, swimming pools, garden ponds, and retention tanks, where accumulated sludge and bottom sediments require regular removal.

The sludge remover operates by suctioning contaminants while simultaneously using the water jet from a pressure washer. This makes it possible to effectively remove silt, sand, leaves, and fine sediments without manual removal. The solution works well both for seasonal cleaning and for routine maintenance of water reservoirs.

The flexible 3.8 m suction hose makes maneuvering the working end easier and allows precise guidance along the bottom of the tank. The hose length is sufficient for most domestic and semi-professional applications, while still allowing good control of the equipment.

The sludge remover is ideal wherever standard washing nozzles are ineffective—especially with dense deposits, accumulated sludge, and organic contaminants that cannot simply be rinsed away.

[faq]

What is this sludge remover used for?|For vacuuming and removing sludge, silt, sand, and sediments from the bottom of ponds, swimming pools, garden ponds, and tanks.

Is a 3.8 m hose length sufficient for working in a pond or pool?|Yes, 3.8 meters allows comfortable operation without entering the water in most standard reservoirs.

Does the sludge remover remove only fine silt or also larger debris?|It works best with silt, sand, and fine sediments; larger items such as stones should be removed beforehand.

Is the sludge remover difficult to operate?|No. The device is easy to use—once connected to a pressure washer, work can begin immediately.

[/faq]